Type 5 - With Carrier Rollers
  

Diamond Chain No.	Pitch (P)	Width Betwwen Inner Plates (W) (Min)	Roller Dia (D) (Max)	Pin Inner Diameter (d1) (Min)	Pin Outer Diameter (d2) (min)	Plate Width IP (H1) (Max)	Plate Width OP (H2) (Max)	Inner Plate Thickness (T)	Width Over Bearing Pin (A) (Max)	Width Over Joint Fateners (B) (Max)	Tensile Strength (Kgf) (Min)
U 25401 HP 01	25.40	8.00	20.00	5.20	8.00	17.20	15.20	2.00	19.50	20.65	2500
U 38101 HP 01	38.10	8.00	20.00	5.20	8.00	17.20	15.20	2.00	19.50	20.65	2800
U 38101 HP 05 *	38.10	12.70	25.40	8.30	11.62	21.20	21.20	2.40	26.50	28.50	3060
U50001 HP 02**	50.00	10.00	30.00	8.30	11.62	26.20	21.20	3.00	26.50	28.50	5100
U50801 HP 01**	50.80	10.00	30.00	8.30	11.62	26.20	26.20	3.00	26.50	28.50	5100
U50801 HP 02**	50.80	10.00	30.00	8.30	11.62	26.20	21.20	3.00	26.50	28.50	5100
U 63001 HP 01	63.00	10.00	30.00	8.30	11.62	26.20	26.20	3.00	26.50	28.50	5100
U 63005 HP 01 *	63.00	15.00	40.00	12.10	16.00	28.70	28.70	4.00	35.00	36.80	5000